Fasting pertaining to weight loss and body composition

find at lease 3 articles on intermediate fasting pertaining to weight loss and body composition

Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 1 of 11
Instructions to Student
 Answer all questions.
 Deadline of submission: 25/11/2020 23:59
 The marks received on the assignment will be scaled down to the actual weightage
of the assignment which is 50 marks
 Formative feedback on the complete assignment draft will be provided if the draft is
submitted at least 10 days before the final submission date.
 Feedback after final evaluation will be provided by 9/12/2020.
Module Learning Outcomes
The following LOs are achieved by the student by completing the assignment successfully
1. Discuss the effect of various biomechanical activities of human body.
2. Analyse systems to convert various bio signals to electrical signals and their recording.
3. Critically evaluate different types of biomedical equipment and their operation.
Assignment Objective
Assignment enables each student to get an insight about biomedical instrumentation techniques
and requirements of medical electronic instruments. Students also get basic knowledge of the principles
of operation of various commercial instruments used in medical field. This assessment will develop
student’s critical thinking, logical reasoning, programming and problem solving skills related to Biomedical
Instrumentation.
Assignment Tasks
1) Task 1 – Submit a work proposal for this assignment on or before 29/10/2020 (23:59) which must
include: (5 Marks)
 Understanding of deliverables – a detail description of deliverables.
 General overview of proposed plan – initial understanding of solution to task2.
 Timeline for completion of the given tasks.
The work proposal must be submitted in a word file through the link available in Moodle.
IN SEMESTER INDIVIDUAL ASSIGNMENT
Module Code: ELEC 30008.1 Module Name: Biomedical Instrumentation
Level: 3 Max. Marks: 100
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 2 of 11
2) Task 2 (95 Marks)
Q1.
a. Consider the process of glomerulus filtration of kidney which is modeled by different pores in
a flat membrane with length of pore as 60 nm and radius as 1 nm. The pores area aggregate
occupied is 5% which is equal to total membrane surface area. The pressure of blood towards
membrane is 8000 Pa and fluid viscosity is 0.002 Pa s. Determine the resulting filtration rate
in cm3/min, if filtration average pressure in ultra-side is 6200 Pa and membrane area in total
available is 1.5 m2. (10 Marks)
b. Assume a mammalian nervous system of complex biological organ which is resting at a
potential of -80 mV. The drug administration in the membrane potential is performed after
injecting intracellular K+ concentration from 150 mmol/L to 55 mmol/L. The K+ concentration
is at equilibrium with a core temperature of 370 C during this process with Faraday and Gas
constant respectively as 96500 C/mol and 8.315 J/mol/K. (10 Marks)
Q2.
a. Ultrasound imaging system is used to determine the liver diseases that occur due to
accumulation of excessive fat in the liver. Assume an ultrasound imaging system that is used
to transmit 3 cycle incidence pulse in the soft tissue of fat and liver interface. The frequency
used by the transducer is 3 MHz and other fat-liver impedances and velocities are respectively
given as 𝜌fat = 920 kg/m3, 𝜌𝑙𝑖𝑣𝑒𝑟 = 1060 kg/m3, Ctissue = 1500 m/s, Cfat = 1450 m/s, Cliver = 1570
m/s. Determine the Axial resolution in mm and reflection coefficients of tissue impedances in
fat-liver interface. (10 Marks)
b. Radiography is an imaging technique used to view the internal form of an object or parts of
the body. Consider the below scenario given in the figure 1 where the incident photons which
enter the tissue is equal to the number of photons that exit the tissue. The incident photons
which enter the tissue are given as 2 x 106 at 50 Kev. Similarly the photons that enter the soft
tissue and blood are 50 Kev as 0.4 cm-1 and 0.2 cm-1 respectively. Find the linear attenuation
coefficient of number of photons that exit the soft tissue. (4 Marks)
Figure 1
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 3 of 11
c. Consider a patient initially tested with 1 Tesla MRI scanner and later shifted to a 3 Tesla MRI
scanner. Note that both MRI scanner uses the same RF coil and slice thickness is halved. The
induced voltage of 1 Tesla MRI machine is V1 whose expression for the magnitude and
received voltage in RF coil is given as
|𝑉| = 2𝜋𝛾0𝑉 𝑠𝑀0(sin 𝛼)𝛽𝛾
𝑤ℎ𝑒𝑟𝑒 Vs: MR slice volume, M0: Magnitude of resultant magnetic vector at equilibrium, 𝛾0 =
Larmor frequency, 𝛼 = tip angle, 𝛽𝛾= magnetic field sensitivity of receive coil.
Determine the ratio of induced voltage 𝑉2
𝑉1
and also reflect the discussion of MRI scanner
changes based on the dependent and independent terms of main static magnetic field.
(6 Marks)
Q3.
a. Describe the generation of bioelectric potential at cellular level due to concentration gradient
of ions inside and outside the cell. What is the average value of the internal resting potential
within the cell with interference to the outside cell? (13 Marks)
b. Consider a person of 60 Kg weight is standing only one foot on a force plate. The Ankle joint
is 40 mm anterior to ground reaction force. The foot mass center is 60 mm from the
Trochanter Knee Ankle (TKA) line. If the foot weight is 0.8 Kg then determine the moment
acting on the ankle joint in equilibrium condition. Also illustrate the understanding in the form
of free body diagram. (7 Marks)
Q4.
a. Design and analyze the Electrocardiogram (ECG) signal processing using labview software
effectively. The design work should include collection of the signal data, denoising, extracting
and analyzing the data by undergoing through the process of signal filtering and generation.
i. Simulate and classify the ECG signal by frequency analyzing (10 Marks)
ii. Analyze the algorithm for denoising and signal in time frequency (5 Marks)
ii. Critical evaluate the results and interpret the understanding of electrical activity
(5 Marks)
b. The present question represents a short clinical scenario performed for a 55 year old patient
with a 12-lead Electrocardiogram (ECG) in a hospital. The ECG was performed to the patient
because he had central chest pain radiating to his left shoulder. Another important thing to
note is patient missed his renal dialysis session of last week as well. As a biomedical
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 4 of 11
instrumentation Engineer interpret the analysis of the ECG report provided in figure 2.
Illustrate the following
i. present your findings from the report and give proper explanation for the graphical activity
(10 Marks)
ii. Explain the ECG pattern observed and highlight the characteristics of major changes
(3 Marks)
iii. Mark out the regular and irregular rhythms and interpret the end result. (2 Marks)
Figure 2 ECG report
Rules & Regulations:
 All resources should be cited using CU Harvard style.
 The final assignment must have a Title page, Table of Contents, References/ bibliography using
CU Harvard Style and page numbers.
 Title Page must have Assignment Name, Module name, Session, your name, ID, and the name of
the faculty.
 Softcopy in word format is to be submitted through Turnitin link on Moodle.
 Viva will be conducted after the assignment submission as per the dates informed earlier.
Guidelines:
 Assignment must be computer typed.
 Font – Times New Roman
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 5 of 11
 Font – Style – Regular
 Font – Size – 12
 Heading should be with Font Size 14, Bold, Capital and Underline.
 Explain with suitable diagrams wherever required. Diagrams must be drawn using suitable
software or by pencil.
 Each student has to do the assignment individually / Students have to do the assignment
collaboratively and each student should write a brief reflection on their contribution and learnings
from group work.
 You can refer books in E-Library or use internet resource. But you should not cut and paste
material from internet nor provide photocopied material from books. The assignment answers
should be in your own words after understanding the matter from the above resources.
Assessment Evaluation Criteria
Classification
And % Range <to be given
as per requirement>
Reflection and critical
analysis.
Knowledge and
Understanding/
Application of Theory
Evidence of Reading
Referencing and
Bibliography
Presentation, Grammar
and Spelling
Outstanding
91-100
Highly competent
analytical skills and
reflective practice,
demonstrating personal
learning and growth,
insight into required
professional values and
principles and professional
development planning.
Extensive knowledge and
depth of understanding of
principles and concepts
and /or outstanding
application of theory in
practice.
Evidence of reading an
extensive range of
educational
literature/research and
where applicable
workplace strategies,
policies and procedures.
Accurate referencing and
bibliography correctly
using appropriate
referencing style
Excellent presentation,
logically structured, using
correct grammar and
spelling, excellent crossreferencing and links to
supporting evidence
Excellent
81–90
Strong analytical skills and
reflective practice used,
demonstrating personal
learning and growth,
insight into required
professional values,
principles and
competencies and
professional development
planning.
Excellent knowledge and
understanding of principles
and concepts and /or
excellent knowledge and
understanding of the
application of theory in
practice
Evidence of reading a wide
range of educational
literature/research and
where applicable,
workplace strategies,
policies and procedures.
Appropriate referencing
and bibliography correctly
using appropriate
referencing style
Good presentation,
competently structured,
using correct grammar and
spelling, clear and easy to
use links to supporting
evidence
Very Good Quality
71-80
Good use of analytical skills
and reflective practice
demonstrating personal
learning and growth,
insight into required
professional values,
principles and
competencies and
professional development
planning.
Good knowledge or key
principles and concepts
and/or good knowledge of
the application of theory in
practice
Evidence of reading a good
range of educational
literature/research and
where applicable workplace
strategies, policies and
procedures.
Generally well referenced
with correct use of the
appropriate referencing
style
Reasonable presentation,
completely structured,
acceptable grammar and
spelling, acceptable links to
supporting evidence
Good (Acceptable)
61-70
Acceptable use of analytical
skills and reflective practice
demonstrating personal
learning and growth,
insight into required
professional values,
principles and
competencies and
professional development
planning.
Acceptable knowledge of
key principles and concepts
and/or knowledge of the
application of theory in
practice
Evidence of reading an
appropriate range of
educational
literature/research and
where applicable, relevant
workplace policies and
procedures
Adequate referencing.
Generally accurate use of
appropriate referencing
style
Adequate presentation and
structure, acceptable
grammar and spelling,
adequate links to
supporting evidence
Adequate/ Satisfactory
51-60
Adequate use of analytical
skills and reflective practice
demonstrating personal
learning and growth,
insight into required
professional values,
principles and
competencies and
Adequate knowledge of key
principles and concepts
and/or satisfactory
evidence of the application
of theory in practice.
Evidence of minimal
reading of educational
literature/research and
where applicable relevant
workplace policies and
procedures
Adequate referencing.
Appropriate referencing
style used but may contain
some inaccuracies.
Weak presentation ,
satisfactory structure,
grammar and spelling, links
to supporting evidence
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 6 of 11
professional development
planning.
Weak /Poor
(all learning outcomes not
adequately met)
0-50
Little use of analytical skills
and reflective practice
demonstrating personal
learning and growth,
insight into required
competencies and/or
professional development
planning. Professional
values and principles not
reflected in the submission.
and/or
Insufficient/no use of
analytical skills and
reflective practice
demonstrating personal
learning and growth,
insight into required
competencies and
professional development
planning
Little evidence of
knowledge of key
principles or concepts
and/or little evidence of
the application of theory in
practice
and/or
No evidence of knowledge
of key principles or
concepts and/or no
evidence of application of
theory in practice
Little or no evidence of
reading outside of the
course textbook and/or
reference to relevant work
place policies and
procedures
and/or
No evidence of reading
outside of the course
textbook and/or reference
to relevant workplace
policies and procedures
Little or no referencing,
incorrect style, or very
inaccurate use of
appropriate referencing
style
Poor presentation,
grammar and spelling, links
to supporting evidence
and/or
Unacceptable
presentation, grammar
and spelling, structure is
very poor, links to
supporting evidence
Important Policies to be followed
1. Student Academic Integrity Policy*:
 MEC upholds the spirit of academic integrity in all forms of academic work and any form of
violation of academic integrity shall invite severe penalty. Any benefit obtained by indulging
in the act of violation of academic integrity shall be cancelled.
 MEC also reserves the right to notify the appropriate law enforcement authorities of any
unlawful activity and to cooperate thereafter in any investigation of such activity.
 Faculty can conduct a viva to investigate and ascertain that the work submitted is student’s
own work as per the guidelines for the same. A student can be given a maximum of 2
chances to attend the viva in such cases. It is expected that the student attends the viva
during the first chance itself unless due to extenuating circumstances. If the student does
not attend the viva in spite of being given 2 chances and fails to submit valid reasons,
he/she will be awarded a fail in the module and this shall be counted as a case of academic
integrity violation.
All cases of violation of academic integrity on the part of the student shall fall under any of the below
mentioned categories:
1. Plagiarism
2. Malpractice
3. Ghost Writing
4. Collusion
5. Other cases
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 7 of 11
If the student fails a module and has a proven case of academic integrity violation in this module,
the student is required to re-register the module. This is applicable to first and second offence of
academic integrity violation of plagiarism type
1.1. First Offence of Academic Integrity Violation:
1.1.1. Plagiarism
a. If a student is caught first time in an act of academic integrity violation during
his/her course of study in any assignment other than project work and if the type
of violation is plagiarism, then the student will be allowed to re-submit the
assignment once as per the period allowed for re submission However, a penalty
of deduction of 25% of the marks obtained for the resubmitted work will be
imposed.
b. Period of re-submission: The student will have to re-submit the work within one
week (5 working days) from the date he or she is advised to re-submit.
c. Re-submission of the work beyond the allowed period of resubmission will not be
accepted and the assessment will be awarded a zero mark.
d. If the re-submitted work (within the allowed period of resubmission) is also found
to be plagiarized, then that assessment component will be awarded a zero mark.
It shall also contribute to the total count of academic integrity violation for that
student.
e. If plagiarism is detected in UG Project work (Project 1, Project Planning and Project
Design and Implementation), the above clauses do not apply, and the work will be
summarily rejected. In these cases the student will be awarded a fail (F) grade and
is required to reregister the module.
1.1.2. Malpractice / Ghostwriting / Collusion
If a student is caught first time in an act academic integrity violation during his/her course
of study for an assessment component irrespective of coursework or end semester and
if the type of violation is Malpractice/Ghostwriting/Collusion, then the student shall fail
the module.
1.2. Second Offence of Academic Integrity Violation:
1.2.1. Plagiarism
a. If any student is caught second time in an act of academic integrity violation during
his/her course of study and if the type of violation is plagiarism, then the student
will not be allowed to resubmit the work, and s/he will directly be awarded zero
for the work in which plagiarism is detected.
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 8 of 11
b. The student shall also receive a warning of suspension in such cases.
1.2.2. Malpractice/Ghostwriting/Collusion
a. If a student is caught a second time in an act academic integrity violation for an
assessment component irrespective of coursework or end semester and if the type
of violation is Malpractice/Ghostwriting/Collusion, then the student shall fail the
module.
b. The student shall also receive a warning of suspension in such cases.
1.3. Third Offence of Academic Integrity Violation:
a. If a student is caught a third time in an act of academic integrity violation for an
assessment component irrespective of coursework or end semester then the student
shall fail the module and also shall be suspended for one semester from the College,
once the academic integrity violation case is confirmed by Institutional Assessment
Review Committee.
b. The student shall be suspended for the immediate subsequent semester and can
register for modules only after having served the suspension period fully. This is also
applicable for semesters offered in block mode.
c. During the suspension period, the student shall have to mandatorily complete a course
on academic integrity/writing before s/he can register for any modules.
d. During the period of suspension, the student shall be allowed to attempt
supplementary examinations if s/he is eligible for the same. S/he shall also be allowed
access to all college facilities permitted for a regular student except for registering the
modules.
1.4. Fourth Offence of Academic Integrity Violation:
a. If a student is caught a fourth time in an act of academic integrity violation for an
assessment component irrespective of coursework or end semester, the student shall
fail the module and also shall be expelled from the College, once the case is confirmed
by Institutional Assessment Review Committee.
b. The student shall be expelled from the college and all access to the college facilities
and premises shall cease to exist. The documents shall be released only after getting
the NOC (No Objection Certificate) from Registration Office.
c. `On termination, the student shall not be refunded any fees paid for the academic
semester in which academic integrity violation was observed.
1.5. Other cases
If a student commits an act of academic integrity violation as per the definition of “other
cases” mentioned in the previous section or of a different nature, student’s case shall be
forwarded to an Institutional Assessment Review Committee, Chaired by the Associate
Dean, Academic Affairs. The committee shall investigate the case by means of a viva and/or
a hearing of the parties concerned if required and shall take appropriate decision. The
penalty that can be granted to a proven case of academic integrity violation which falls in
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 9 of 11
this category of “other cases” can be a warning/component zero/ module
fail/suspension/expulsion depending on the nature and gravity of the offence.
1.6. Types/Variations of cases of Plagiarism and associated actions
Type 1: In case plagiarism is detected in any component or part submission (submitted at
different times) of one assessment (assignment), the deduction in marks will be applicable
for the whole assessment (assignment), even if only the component or part submission alone
needs to be resubmitted.
Type 2: In case plagiarism is detected in a group assessment, all students of the group will be
considered as having committed an act of plagiarism irrespective of whether plagiarism is on
account of the act of all or a few or only one member. The policy will then be applied to all
students.
If some students in the group are eligible to re-submit (first offence) and others are not
eligible, only eligible students will be allowed to re-submit within a period of one week and
the penalty will be applied as per the policy for each student according to his / her history of
violations.
Type 3: Combination of Type 1 and Type 2: In case plagiarism is detected in any component
or part submission (submitted at different times) of a group assessment (assignment), the
deduction in marks will be applicable for the whole assessment (assignment), even if only the
component or part submission alone needs to be resubmitted. All students of the group
would be considered as having committed an act of plagiarism irrespective of whether
plagiarism is on account of the act of all or a few or only one member. The policy will then be
applied to all the students of the group.
If some students in the group are eligible to re-submit (first offence) and others are not
eligible, only eligible students will be allowed to re-submit within a period of one week and
the penalty will be applied as per the policy for each student according to his / her history of
violation.
Type 4: Variation of Type 1 and Type 2: In cases where the assessment consists of
components or part submissions that could be a group assessment component (e.g. group
assignment) and an individual assessment component (e.g. individual reflection), the
following will be applicable:
a. If plagiarism is detected in the group assessment component, all students of the group will
be considered as having committed an act of plagiarism, irrespective of whether plagiarism
is on account of the act of all or a few or only one member. The policy will then be applied to
all students of the group. In such cases the group assessment component will be resubmitted.
If some students in the group are eligible to re-submit (first offence) and others are not
eligible, only eligible students will be allowed to re-submit within a period of one week and
the penalty will be applied for each student according to his / her history of violation.
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 10 of 11
b. If plagiarism is detected in the individual assessment component, the individual assessment
component will be resubmitted – if the student is eligible for resubmission-. The policy will
then be applied to that student alone.
c. In both cases (a) and/or (b), the deduction in marks will be applicable for the whole
assessment (assignment).
1.7. Types/Variation of Cases of Multiple Offences
If student is caught with multiple violations of same or different nature in different modules
of the same semester, they will be considered as one offence and student will be penalized
for each violation according to the type of the offence.
If student is caught with multiple violations of same or different nature in the same module
of the same semester, then they will be considered as different offences and each will
contribute to the overall count of AIV. The student then shall be penalized for each violation
according to the count and type of each offence.
* For further details Refer to MEC Student Academic Integrity Policy in Student Handbook.
2. Late Submission Regulations:
It is the students’ responsibility to check all relevant timelines related to assessments.
As per the Assessment Policy at MEC, late submissions are allowed for one week (5 working days)
for all UG modules with a penalty. In such cases, a deduction of 5% of the marks obtained for the
submitted work shall be imposed for each working day following the last date of submission
till the date of actual submission. Assessment documents submitted beyond a period of one
week (5 working days) after the last date of submission will not be accepted and will be awarded
a zero for that assessment. In cases where the submission has been delayed due to extenuating
circumstances, the student may be permitted to submit the work without imposing the late
submission policy stated above. The extended period of submission will be one week from the
original last date of submission. In such cases, the student is expected to submit the supporting
certificates on or before the original last date of submission of the assessment and the decision
of extension rests with faculty responsible for the assessment .The late submission policy shall be
applied if the student fails to submit the work within one week of the original last date of
submission.
Students may contact their teachers for clarification on specific details of the submission time if
required.
3. Research Ethics and Biosafety Policy
To protect and respect the rights, dignity, health, safety, and privacy of research subjects involved
including the welfare of animals and the integrity of environment, all student projects are
expected to be undertaken as per the MEC Research Ethics and Biosafety Policy. Accordingly the
following shall apply.
Biomedical Instrumentation (ELEC 30008.1) – FALL – 2020 – CW 1(Assignment1) – All – QP
MEC_AMO_TEM_035_02 Page 11 of 11
 Research and other enterprise activities shall be conducted by maintaining the high ethical
standards consistent with national and international standards and conventions.
 Any research at MEC that is categorized as high-risk research shall be subject to review and
approval by the Research Ethics and Biosafety Committee.
 Research activities involving collection of human or animal tissues and manipulation of microbial,
animal or plant cells shall be subject to review and approval by the Research Ethics and Biosafety
Committee.
 Participants involved in research must be informed about the purpose of research and intended
uses of research findings. Written consent must be obtained from people involved prior to the
commencement of research.
 Data obtained from participants must be treated with high confidence and should be used only
for the intended purpose of research.

Don't use plagiarized sources. Get Your Custom Essay on
Fasting pertaining to weight loss and body composition
Just from $10/Page
Order Essay

Get professional assignment help cheaply

Are you busy and do not have time to handle your assignment? Are you scared that your paper will not make the grade? Do you have responsibilities that may hinder you from turning in your assignment on time? Are you tired and can barely handle your assignment? Are your grades inconsistent?

Whichever your reason may is, it is valid! You can get professional academic help from our service at affordable rates. We have a team of professional academic writers who can handle all your assignments.

Our essay writers are graduates with diplomas, bachelor, masters, Ph.D., and doctorate degrees in various subjects. The minimum requirement to be an essay writer with our essay writing service is to have a college diploma. When assigning your order, we match the paper subject with the area of specialization of the writer.

Why choose our academic writing service?

  • Plagiarism free papers
  • Timely delivery
  • Any deadline
  • Skilled, Experienced Native English Writers
  • Subject-relevant academic writer
  • Adherence to paper instructions
  • Ability to tackle bulk assignments
  • Reasonable prices
  • 24/7 Customer Support
  • Get superb grades consistently

 

 

 

 

 

 

Order a unique copy of this paper
(550 words)

Approximate price: $22

Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

We value our customers and so we ensure that what we do is 100% original..
With us you are guaranteed of quality work done by our qualified experts.Your information and everything that you do with us is kept completely confidential.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read more

Zero-plagiarism guarantee

The Product ordered is guaranteed to be original. Orders are checked by the most advanced anti-plagiarism software in the market to assure that the Product is 100% original. The Company has a zero tolerance policy for plagiarism.

Read more

Free-revision policy

The Free Revision policy is a courtesy service that the Company provides to help ensure Customer’s total satisfaction with the completed Order. To receive free revision the Company requires that the Customer provide the request within fourteen (14) days from the first completion date and within a period of thirty (30) days for dissertations.

Read more

Privacy policy

The Company is committed to protect the privacy of the Customer and it will never resell or share any of Customer’s personal information, including credit card data, with any third party. All the online transactions are processed through the secure and reliable online payment systems.

Read more

Fair-cooperation guarantee

By placing an order with us, you agree to the service we provide. We will endear to do all that it takes to deliver a comprehensive paper as per your requirements. We also count on your cooperation to ensure that we deliver on this mandate.

Read more

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency
Open chat
1
You can contact our live agent via WhatsApp! Via +1 817 953 0426

Feel free to ask questions, clarifications, or discounts available when placing an order.

Order your essay today and save 20% with the discount code VICTORY